Ditto
Try it both ways on a weak station. See which works better WITHOUT moving them.Keep in mind the switches were crap on most set top ears. We used Rembrant brand & some Zeniths.
73 Zeno
LFOD !
Quote:
Originally Posted by DavGoodlin
If this is a set-top antenna, the clear or gold twin-lead was meant for UHF, the VHF was the standard brown.
Put a meter across the leads in Rx1 range and if the antenna's UHF element is a loop, run the switch around and generally, the UHF twin lead will measure very low, almost an ohm.
|
10-08-2021, 04:42 PM
Threaded Mode