|
|
|
#11
06-09-2023, 02:15 PM
|
||||
|
||||
|
One thing I learned on an SCR sweep RCA is if the breaker is tripping and you want to know if it's the trippler or not just unhook the flyback output from the trippler input and stick the lead in a jar so it won't arc. If the breaker won't trip like that the trippler is bad, if still trips you have other problems....
You can do the same test to check the trippler if the set isn't tripping the break, but isn't making HV... Only you want to monitor Boost voltage. If it's very low with the trippler and normal or high without the trippler loading it then the trippler is bad.
__________________
Tom C. Zenith: The quality stays in EVEN after the name falls off! What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4 
|
|
|
Threaded Mode